Facility

Integra LifeSciences Braintree Inc.

116 recall(s) on record — most severe on record: Class I.

Key facts

116recalls · worst Class I

3inspections · worst OAI

2warning letters

Recalls are listed for the parent company: openFDA recall records do not name a facility. How we attribute records

FDA Establishment Identifier (FEI)	3004170064
Establishment type	Manufacture Medical Device
Location	400b Wood Rd Braintree, MA, US 02184
Registration status	Active · expires 2026
Parent company	Integra LifeSciences Corporation (owner-operator 9004007)
Brand names	SurgiMend -e Collagen Matrix; SurgiMend 2 Collagen Matrix; SurgiMend 3 Collagen Matrix; SurgiMend 4 Collagen Matrix

Activity by year

Recalls (116)
Inspections (3)
Warning letters (2)

Devices registered here (1)

Mesh, Surgical
Product code FTM (opens in a new tab) · Class II · General, Plastic Surgery · 21 CFR 878.3300

Recalls & enforcement

20265 records

Class IIOngoing2026-06-05
The current Omni-Tract Surgical Retractor System IFU states a dry time of 30 minutes. Integra LifeSciences has identified that the dry time needs to be extended to 90 minutes, 110 minutes, or 120 minutes depending on the sterilization cycle exposure time used.
Class IIOngoing2026-04-10
Out-of-specification endotoxin result that did not meet the acceptance criteria.
Class IIOngoing2026-03-19
Increased rate of out-of-specification endotoxin results.
Class IIOngoing2026-03-06
Software issue that renders the touch screen unresponsive.
Class IIOngoing2026-01-16
Potential packaging failures, which could lead to a breach in the sterile barrier.

202510 records

Class IIOngoing2025-12-12
Potential corrosion stains on the surface of the 14-gauge Tuohy Needle that is included in the Microsensor and Cerelink ICP Kits.
Class IIOngoing2025-10-03
It was determined that when the navigation system is configured with specific revision combinations of the Multi Instrument Adapter together with the Patient Tracker the system may not meet its specified accuracy for visual verification of device location within the patient s ana…
Class IOngoing2025-09-26
Expansion of recall of size 14 mm Codman Disposable Perforators for inadequate welds to size 11 mm and 9 mm Codman Disposable Perforators out of an abundance of caution.
Class IIOngoing2025-08-05
Packaging failures were identified which could lead to a breach in the sterile barrier.
Class IOngoing2025-05-23
Lack of sterility assurance.
Class IOngoing2025-05-22
Devices contain potentially out-of-specification levels of endotoxins and lack of sterility assurance.
Class IOngoing2025-04-11
Inadequate weld that can potentially cause the product to disassemble.
Class IIOngoing2025-04-04
Incorrect product packaged in INSPIRA AIR Balloon Dilation System carton.
Class IIOngoing2025-02-06
Possibility for the obturator to break (separate).
Class IIOngoing2025-01-10
Potential that the induction seal is not completely sealed to the device tube packaging.

202410 records

Class IIOngoing2024-12-16
Potential for certain SKUs and lot numbers were distributed with the incorrect product description on the internal and external labels.
Class IIOngoing2024-09-26
Out of specification endotoxin levels.
Class IIOngoing2024-09-20
Identified higher-than-expected levels of endotoxin within the raw material used to produce Codman Surgical Patties and Strips that may have resulted in out-of-specification levels of endotoxin in finished goods
Class IIOngoing2024-09-13
There is a potential for pinholes in the applicator pouch film which creates a sterility concern.
Class IIOngoing2024-07-09
Specific lots of TruDi NAV Suction Instruments 0 Degrees were incorrectly calibrated which when used with the TruDi Navigation System, may result in a discrepancy between the actual tip location and the visualized location displayed on the system.
Class IIOngoing2024-06-07
Potential sheath damage that could lead to tissue damage and/or track hemorrhage.
Class IIOngoing2024-05-29
Potential for the CUSA Excel 23KHz Straight Handpiece housing to crack, may result in delay of treatment
Class IIOngoing2024-05-07
Defect in the external sterile packaging (pouch) leading to a gap or/and weakness of the seal may compromise the product sterility.
Class IIOngoing2024-04-17
Potential holes and tears in the sterile packaging (header bag) of the Cranial Access Kit may compromise the sterility of the device.
Class IIOngoing2024-01-19
A defect in the sterile packaging (header bag) of the Cranial Access Kit failing the required packaging integrity testing criteria. Therefore, product sterility maybe compromised.

20233 records

Class IIOngoing2023-10-19
Defect in the outer packaging of the Cranial Access Kits can cause the packaging to split without any additional forces outside compromising the sterility of the device
Class IOngoing2023-10-05
Firm is expanding the existing recall RES 90457 for the Cerelink, initiated in June 2022, to include all CereLink ICP Extension Cables. The updated corrective action includes a design change to the extension cable to address the "out of range readings" issue.
Class IIOngoing2023-04-11
Released with discoloration (rust) on the Drill Chuck and inner chuck of Codman Cranial Hand Drill may result in inflammation, local toxicity, systemic toxicity, sensitivity, revision surgery, procedural delay, inconvenience to user, and/or infection.

20224 records

Class IIOngoing2022-12-02
Integra LifeSciences identified that one lot was released with out-of-specification endotoxin results. The worst-case risk for the use of affected Surgical Patties is potentially a minor transient fever.
Class IOngoing2022-06-22
Integra has received complaints associated with ICP readings drifting to -50 mmHg (out-of-range) and may manifest an error message "sensor or extension cable failure!" The firm has found that this is caused by electrical interference from a component of the monitor's circuit boar…
Class IIOngoing2022-02-28
Excess force used to tighten the Universal Flexible Arm can cause the internal cable to break at the tip, resulting in an unusable condition.
Class IITerminated2022-01-21
Incorrect extended expiration dates identified on the outer box label only, if product is used past the correct expiration date there is a potential for pain, infection, or adverse tissue reaction to occur

20212 records

Class IITerminated2021-06-01
Packaging-pouches with wrinkles across the Tyvek side may compromise the integrity of the pouch's sterile barrier
Class IITerminated2021-03-17
Incorrect labeling, Catheter did not have the required holes and markings

20204 records

Class IITerminated2020-12-14
Mislabeled product-Bactiseal Ventricular Catheter with Bactiseal Shunt System(823073) mislabeled as Bactiseal Endoscopic Ventricular Catheter (823087) and vs. versa
Class IITerminated2020-11-11
Revised Instruction Manual to reflect the most accurate illustration for Mayfield Skull Clamp A2000 Position Diagram
Class IITerminated2020-08-04
lntegra LifeSciences has identified through a number of complaints that the handpiece cable melts following sterilization.
Class IIITerminated2020-02-07
Nonconforming product which was dispositioned for rejection was mistakenly released for commercial use.

20199 records

Class IITerminated2019-11-04
Silicone PIP Implant mislabeled as a size 1 implant on the outer packaging when in fact the package contained a size 0 implant
Class IITerminated2019-10-21
The 36 kHz Sterilization Tray (C7136 Rev C / 72904491 Rev A) system does not meet the Dry Time Criteria for a 30-minute drying cycle. The current CUSA Clarity Operators manual states 30 minutes for the minimum Dry Time for the 36 kHz Sterilization Tray and 36 kHz Components but 4…
Class IIOngoing2019-09-12
There is a potential for a progressive decline in observed ICP readings of the monitor during use.
Class IITerminated2019-08-07
A small crack at the box lock corner may after multiple cleaning and sterilization cycles produce an increased risk of corrosion, weakening the instrument and resulting in premature need for replacement and/or breakage of the instrument
Class IITerminated2019-07-19
Tips have an inadequate product insulation coating, which could result in the tips not coagulating as expected
Class ITerminated2019-04-08
The firm has identified a complaint trend regarding breakage of the LimiTorr Transducer Mount stopcock and MoniTorr Panel Mount stopcock.
Class IITerminated2019-03-31
Stability did not meet acceptance criteria for visual appearance during mixing and force vs. displacement at 6 months
Class IITerminated2019-03-08
The Salto Talaris and Integra XT Revision implant labelling was found to list an incorrect metallic coating material symbol on the metallic implant labels (box and inner pouch) and IFU
Class IITerminated2019-03-01
Temperature indicator may have changed color to dark gray or black prior to shipment. Change in color may indicate the product exposure to temperatures greater than 110F

20182 records

Class IITerminated2018-06-29
There is a potential for the knob assembly in the swivel adapter to fracture/break during use.
Class IITerminated2018-03-06
Incorrect gel part number listed in a master manufacturing record

20176 records

Class IITerminated2017-12-20
Incidents of stem trial breakage were reported to the firm suggesting that these fractures all occurred during insertion/impaction or extraction of the humeral stem trial whiling preparing the humeral canal and/or trialing. All cases resulted in a delay in surgery, with a varianc…
Class IITerminated2017-09-26
A faulty footswitch may result in unintended ultrasonic fragmentation activation. There are two scenarios when the failure mode may occur: 1) Ultrasonic fragmentation may be inadvertently activated at start-up or at the initial use once the footswitch is connected to the consol…
Class IITerminated2017-08-18
A quarantined lot of the devices was released for sale. Devices from this lot may experience increased exothermic reaction causing higher levels of heat output which exceed the product specifications.
Class IITerminated2017-03-03
Voluntary recall/Removal of Panta and Panta XI Nails because there may be the potential that the internal and external package seal does not provide the level of sterility intended.
Class IIITerminated2017-01-25
The firm received one complaint from one non-US sales representative (France) that the label on the UNI-CP plate was incorrect.
Class IITerminated2017-01-20
Posterior tibial fractures have been reported.

201613 records

Class IITerminated2016-08-24
Integra LifeSciences has been notified of a medical device recall by Adaptive Surgical, LLC involving their Riverlon" Nylon 3-0 Sutures that are packaged in Integras Cranial Access Kits. It was found that product seals may become open during extreme distribution conditions and r…
Class IITerminated2016-08-24
Integra LifeSciences has recently identified that one lot of Spinal Tray 24 G Gertie Marx Catalogue # 899379 was shipped containing the 24 G Gertie Marx needle without an introducer.
Class IITerminated2016-08-23
During final sampling inspection, one of the lots was discovered with a total incomplete packaging seal of the sterile product.
Class IITerminated2016-08-04
Integra LifeSciences is recalling Spinal Trays, Cat No. 3404875, because of the affected recalled Hospira 5% Lidocaine HCL that is a component of some lots of the Spinal Trays.
Class IITerminated2016-07-21
Labeling on the Qwix Screw product states that it is a "compression screw" instead of a "positioning screw".
Class IITerminated2016-07-20
Through the investigation of reported complaints Integra verified that there have been instances where the Universal Wire Fixation Bolts the Slotted Post broke during use at the surgical site.
Class IITerminated2016-07-01
The silicone insert embedded in the rocker bottom has the potential to become dislodged or loose from the rocker bottom mold.
Class IITerminated2016-06-17
Data from internal studies suggests there may be a potential that the secondary package seal integrity does not provide the level of sterility intended for Minimally Invasive Achilles Tendon Suture System Achillon.
Class IITerminated2016-05-20
The affected K-wires do not meet specification requirements. Specifically, a) K-wires were made of 316LVM stainless steel instead of 304 stainless steel. b) K-wires have passivated surface finish instead of electro-polish surface finish. c) K-wires have incorrect length and diame…
Class IITerminated2016-05-10
As a result of an internal investigation of a non-conformance it has been determined: 1) Depth Gauges from Lot UP15H2 exceed the overall length specification requirements. 2) Depth Gauges from prior lot numbers manufactured before Integra acquired the product line reflect an inco…
Class IITerminated2016-04-29
As a result of an internal review of all labeling for the Cadence System, it was determined that the outer package label for the Size 5 Left Tibial Tray Implant reflects the material composition incorrectly. The labeling incorrectly reflects the material as Cobalt Chromium inste…
Class IITerminated2016-03-11
Integra's post QA release review of historical product release test results for Meshed IDRT products identified the Peel Strength test average result was incorrectly calculated for a single Lot (Lot 105A00324750).
Class IITerminated2016-03-07
Reports relating to unintended patient or operator burns or operator electric shock for some of Integra's MicroFrance electrosurgical instruments.

20157 records

Class IITerminated2015-09-22
Integra received an Urgent Drug Recall Notice from Hospira Inc. for their 1% Lidocaine HCL Injection, USP, 10 mg/mL, Lot 44-359-DK. Hospira Inc. is recalling vials of Lot 44-359-DK, 1% Lidocaine HCL Injection, USP, 10 mg/mLm distributed by Hospira from February 2015 to March 201…
Class IITerminated2015-08-21
Integra identified that the UCHRAP component (Arc Adapter Plate) would not assemble properly to the UCHRAR component (ARC Adapter Ring) of the Compact Head Ring Adapter due to an error in the manufacturing drawing.
Class IITerminated2015-05-27
Integra LifeSciences is recalling the Camino Intracranial Pressure Monitoring Catheters because they may have been incorrectly assembled. Specifically, the o-ring in the bolt adapter may be in the wrong location and as a result, there is a potential CSF/blood could leak from the…
Class IITerminated2015-05-01
Integra LifeSciences Corp. d.b.a. Integra Pain Management Announces Voluntary Recall of Tuohy Needles (20 Gauge, 5 inch) due to incorrect packaging (labeled as 18 Gauge, 3. 5 inch).
Class IITerminated2015-04-14
Integra LifeSciences Corporation is recalling Integra's Camino ICP Monitor (CAM02) & Licox PtO2 Monitor ( LCX02 & LCX02R) due to complaints that the audible speaker malfunctions.
Class IITerminated2015-03-30
A single lot of 18 Gauge, 3.5 inch Tuohy Needles were incorrectly packaged and labeled as 18 Gauge, 5 inch needles.
Class IITerminated2015-03-13
A lot of Flowable Wound Matrix that has been distributed to customers in late 2013 / early 2014 was verified as not meeting stability acceptance criteria for the attributes of visual appearance during dispensing and force vs. displacement (force needed for product to be extruded …

201415 records

Class IITerminated2014-12-19
Through an investigation of complaints, Integra found that there is the possibility for the locking handle mechanism of the Base Units to fail during use.
Class IITerminated2014-11-07
Due to a complaint, it was determined that multiple lots of Licox catheters manufactured since October 29, 2013 contained a smart card which was programmed with an inaccurate lkN2 value.
Class IITerminated2014-11-06
Integra LifeSciences has determined that a portion of some specific lots of size 10 PyroSphere CMC and PyroSphere TMT devices are non-radiopaque.
Class IITerminated2014-10-24
A single lot of left and a single lot of right Reverse Shoulder System cutting templates were manufactured incorrectly. Specifically, the threaded handle has been welded backwards on the template resulting in the cutting angle being the reverse of what it should be.
Class IITerminated2014-09-29
Some specific lots of Selector Tubing may potentially leak irrigation fluid during use if not placed on the Selector handpiece in a specific manner.
Class IITerminated2014-08-18
Integra LifeSciences Corporation received 2 complaints that the USB port on the Licox Pt02 monitor does not consistently provide the user the ability to extract the Pt02 trend data according to the User's Manual for the device.
Class IITerminated2014-07-09
Integra LifeSciences is recalling the Camino Intracranial Pressure Monitoring Kits because of revised labelling to indicate they are unsafe in an MR environment.
Class IITerminated2014-06-27
Integra LifeSciences is recalling the Integra NewPort MIS System because there is a possibility that components from the demonstration set may have been mixed with the NewPort MIS pedicle screw system components used in surgery.
Class IITerminated2014-06-11
LED battery chargers may prematurely fail and will not charge the LED battery as intended
Class IITerminated2014-06-09
Integra Lifesciences is recalling NewPort System MIS Rod, 2 because it may be up to 30 degrees offset from specification requirements causing misalignment with the inserter. This could potentially result in the lordosis of the rod not aligning with the handle when the inserter i…
Class IITerminated2014-05-19
This lot of Accell Evo3C Demineralized Bone Matrix, 5cc was incorrectly packaged in boxes that describe the product as Accell Evo3 Demineralized Bone Matrix. Evo3C is contraindicated for treatment of vertebral compression and not indicated for use in the posterolateral spine.
Class IITerminated2014-04-16
Integra LifeSciences has identified through a small number of complaints that some lot numbers of Licox Test Kits (Catalog Number BC10R) may provide erroneous "calibration test failure" message when they are used with the Licox PtO2 Monitor (LCSO2, or may provide an erroneous out…
Class IITerminated2014-03-28
New Deal has identified through a complaint report that some 3.5 mm Diameter x 22 mm Length Surfix screws in Lot no. F626 (Catalogue No. 285322S) have been packaged and labeled as 3.5mm Diameter x 30 mm Length Surfix screws (Catalogue No. 285330S).
Class IITerminated2014-03-10
Some 23 kHz Torque Wrenches were incorrectly assembled and contained a 36 kHz Hex Wrench Insert instead of the 23 kHz Hex Wrench Insert.
Class IITerminated2014-01-22
Integra LifeSciences has identified through an investigation of complaints that there may be the potential for the shaft of the Malibu Polyaxial Drivers to break during use. None of the complaints reported a patient injury. However, some complaints did indicate the surgery was …

201316 records

Class IITerminated2013-12-05
The blue COAG button on the CUSA Excel CEM nosecone could stick in the 'activated' position.
Class IITerminated2013-11-26
Integra became aware through a complaint from a single non-US customer that if the optional SYS/DIAS mode is used on CAM01 monitor that contains Mod 4 Firmware, the displayed values for the systolic and diastolic intracranial pressure (ICP) are reversed. But, if the CAM01 is use…
Class IITerminated2013-11-26
Integra LifeSciences is voluntarily recalling any unexpired lots of HITHSP10 Cranial Access Kits due to identified labeling discrepancies. kit contains DuraPrep and Monocryl sutures whose labeling does not align with the intended use and labeling of the Cranial Access Kit.
Class IITerminated2013-11-13
Integra became aware through an adverse complaint trend that Rickham Style Reservoirs with bent or broken connectors that were shipped in sleeve-type packages were found prior to use but after the sterile package was open.
Class IITerminated2013-10-28
Integra LifeSciences Corporation is recalling certain lots of Integra Kits for Epidural Anesthesia Administration as a result of a Product Advisory Notice from BD Medical for the LOR syringes indicating the plunger of the syringe may stall or stick when travelling within the syri…
Class IITerminated2013-09-10
Integra LifeSciences has identified through an internal evaluation that in order to comply with US FDA requirements, certain Camino® Intracranial Pressure Monitoring Kits require additional labelling to indicate they are UNSAFE in an MR environment. Only the following Camino® …
Class IITerminated2013-09-04
Integra is recalling certain lots of Cranial Access Kit due to a possibility that the seal integrity of the sterile package may become compromised during shipping.
Class IITerminated2013-08-29
An investigation of an adverse trend of complaints for the Skull Clamp index locking knob not easily unlocking or disengaging and malfunctions of the 80 lbs. torque knob was initiated. None of the complaints resulted in a report of patient injury, adverse health consequence, or …
Class IITerminated2013-07-17
As a result of complaint investigations it was identified that there is a potential that the Leyla Ball Joint Clamp (R2383) may not provide the level of stability needed to maintain retraction in all cases.
Class IITerminated2013-06-11
Integra LifeSciences Corporation has determined that there is a possibility that some lots of Licox CMP Brain Tissue Oxygen and Temperature Catheter Kits contain a hex wrench that does not loosen the set screw on the drill bit.
Class IIITerminated2013-06-03
As a result of a quality review, labelling content discrepancies were identified between the Instruction for Use (IFU) distributed in the US with the Ascension CMC and the content that is cleared by FDA.
Class IITerminated2013-05-09
As a result of the investigation into an adverse trend of complaints for reports of misalignment of the calcaneal or tibial screws during use of the Panta Nail Support Device, Integra has decided to issue this voluntary medical device correction. The misalignment can result in t…
Class IITerminated2013-03-28
Due to the process deviation, product lots in question may have been released with higher levels of pyrogens than permitted by the specifications for the products.
Class IITerminated2013-02-12
Addendum to the Instructions for Use. The addendum emphasizes the warnings and precautions already contained in the device's IFU and also provides additional warnings and precautions that are applicable to the use of electrosurgical equipment in health care facility environments…
Class IITerminated2013-02-01
The firm has received numerous complaints of the cannulated screw driver tip breaking during surgery.
Class IITerminated2013-01-07
There is a potential for erosion of the CUSA EXcel tip used with the Nosecone. Specifically, the potential for tip erosion occurs when using a CUSA CEM Nosecone if the side of the tip, rather than the annulus of the tip, is in contact with the tissue. This erosion can potential…

20129 records

Class IITerminated2012-12-21
Integra determined there is a possibility that the Base Units may break during use.
Class IITerminated2012-12-10
Depending on the system configuration, a software error message in versions 5.0.1 and 5.0.2. occurs if a beam plan is transmitted from XKnife using DICOM-RT.
Class IITerminated2012-11-05
An investigation of an adverse trend of complaints conducted by Integra LifeSciences identified various product performance issues which could impact the functionality of the firm's Mayfield Composite Series Base Units and Mayfield Skull Clamps. In order to prevent additional co…
Class IITerminated2012-08-09
T-handle screw is used on a complementary product to the CRW, the Integra HRAIM, which is the CT-compatible intubation Head Ring Assembly. When the T-handle on the HRAIM intubation hoop is tightened, the T-handle could stop in a vertical position that prevents the CRWPRECISE and…
Class IITerminated2012-07-27
An investigation of customer complaints identified that for two product lots, Left Horseshoe Gel Pads were packaged as a Right Horseshoe Gel Pads and vice versa. None of the complaints resulted in a report of patient injuries or an increase in the time to complete the surgical pr…
Class IIITerminated2012-06-07
Integra LifeSciences is recalling one lot of Single Shot Epidural Trays as the product was inadvertently shipped missing injectable components.
Class IITerminated2012-05-23
The Integra(TM) Jarit(R) Take-Apart Laparoscopic Instrument shafts were released with internal component out of specification.
Class IITerminated2012-04-04
The pouch label of catalog NL850-1330 indicates an incorrect model and closing pressure of the device. The incorrect label reads: "Model: 12 mm-Medium Pressure" instead of "Model: 16 mm-Low Pressure".
Class IITerminated2012-02-09
Incorrect technique applied may cause potential rupture of the tibialis anterior tendon during surgery.

20111 record

Class IITerminated2011-10-11
The Instructions for Use {HIFU} {Putty Part Number 7700713001 and Strip Part Number 770151300 l for CE marked Mozaik Strip and Putty products contains an incorrect translation of the term "bone marrow aspirate". The term is incorrectly translated in Spanish and French,

FDA inspections (3)

OAI2023-05-17
Official Action Indicated · Compliance: Devices; Postmarket Assurance: Devices · citations posted
VAI2021-11-12
Voluntary Action Indicated · Compliance: Devices · citations posted
OAI2018-11-02
Official Action Indicated · Compliance: Devices; Postmarket Assurance: Devices

Source: U.S. FDA Inspections Dashboard (opens in a new tab) (device inspection classifications, 2016–present). Data as of 2026-10-06. The dashboard profile can take several seconds to load.

FDA warning letters (2)

Warning Letter2023-07-17
Warning Letter (opens in a new tab) · Boston Massachusetts
Warning Letter2019-03-06
Warning Letter (opens in a new tab) · Boston Massachusetts

Source: U.S. FDA Compliance Actions Dashboard (opens in a new tab) (device warning letters, 2016–present). Data as of 2026-10-06. Each link opens an FDA search for the letter; FDA can take several weeks to post a letter, so a very recent one may not appear yet.

Source: U.S. FDA via openFDA (opens in a new tab) (device registration & enforcement). Data as of 2026-10-06. Verify this facility record at FDA → (opens in a new tab)

Cite this record

RegWarden. “Integra LifeSciences Braintree Inc. (FEI 3004170064) — FDA facility record.” Compiled from U.S. FDA public records (openFDA; FDA Data Dashboard). Data as of 2026-10-06. https://regwarden.com/facility/3004170064-integra-lifesciences-braintree-inc/

Not open yet

Alerts for Integra LifeSciences Braintree Inc.

Watchlist alerts will email you when FDA publishes a new recall, inspection classification, or warning letter for a facility you follow. They aren't open to the public yet — leave your email and we'll tell you when they are.

Planned

Want a one-page facility brief?

A single-page summary of this facility's registration and recall history for diligence. Not selling it yet — register interest and we'll follow up.